CYRUS.CONF

NAME
DESCRIPTION
SECTION DESCRIPTIONS
EXAMPLE
ACCESS CONTROL
SEE ALSO

NAME

cyrus.conf − Cyrus configuration file

DESCRIPTION

/etc/cyrus.conf is the configuration file for the Cyrus cyrmaster process. It defines the startup procedures, services and events to be spawned by cyrmaster.

The /etc/cyrus.conf file consists of a series of entries divided into sections of the form

section {

name arguments

...

...

...

}

where section is the name of the section, name is the name of the entry and arguments is the whitespace-separated list of arguments for the entry.

Blank lines and lines beginning with ‘‘#’’ are ignored.

SECTION DESCRIPTIONS

The paragraphs below detail the three sections (START, SERVICES, EVENTS) that can be placed in the /etc/cyrus.conf file. The arguments that are available for each entry within the section are described, and each argument’s default value is shown.

Arguments can appear in any order. Some arguments have no default value, these are listed with ‘‘<no default>’’. For string arguments, the value MUST be enclosed in double quotes.

START

This section lists the processes to run before any SERVICES are spawned. This section is typically used to initialize databases and start long running daemons.

cmd=<no default>

The command (with options) to spawn as a child process. This string argument is required.

SERVICES

This section is the heart of the /etc/cyrus.conf file. It lists the processes that should be spawned to handle client connections made on certain Internet/UNIX sockets.

cmd=<no default>

The command (with options) to spawn as a child process. This string argument is required.

listen=<no default>

The UNIX or internet socket to listen on. This string field is required and takes one of the following forms:

path
[ host : ] port

where path is the explicit (absolute) path to a UNIX socket, host is either the hostname or bracket-enclosed IP address of a network interface, and port is either a port number or service name (as listed in /etc/services).

proto=tcp

The protocol used for this service (tcp, tcp4, tcp6, udp, udp4, udp6). This string argument is optional.

tcp4, udp4: These arguments are used to bind the service to IPv4 only.

tcp6, udp6: These arguments are used to bind the service to IPv6 only, if the operating system supports this.

tcp, udp: These arguments are used to bind to both IPv4 and IPv6 if possible. When using UNIX sockets, tcp selects stream sockets (the default), and udp selects datagram sockets.

prefork=0

The number of instances of this service to always have running and waiting for a connection (for faster initial response time). This integer value is optional.

For datagram-based services (udp), the maximum value of prefork is 1.

maxchild=-1

The maximum number of instances of this service to spawn. A value of -1 means unlimited. This integer value is optional.

maxfds=256

The maximum number of file descriptors to which to limit this process. This integer value is optional.

maxforkrate=0

Maximum number of forks per second for this service. A value of zero means unlimited fork rate. This integer value is optional.

babysit=0

Set to non-zero to guarantee that at least one child will always be available for new connections. The value of maxchild is ignored if all children are busy and babysit is active. This integer value is optional.

EVENTS

This section lists processes that should be run at specific intervals, similar to cron jobs. This section is typically used to perform scheduled cleanup/maintenance.

cmd=<no default>

The command (with options) to spawn as a child process. This string argument is required.

period=0

The interval (in minutes) at which to run the command. This integer value is optional, but SHOULD be a positive integer > 10.

at=<hhmm>

The time (24-hour format) at which to run the command each day. If set to a valid time (0000-2359), period is automatically set to 1440. This string argument is optional.

EXAMPLE

# example cyrus.conf

START { recover

cmd="ctl_cyrusdb -r"

}

SERVICES { imap

cmd="imapd" listen="imap" prefork=1 imaps

cmd="imapd -s" listen="imaps" prefork=0 lmtpunix

cmd="lmtpd" listen="/var/imap/socket/lmtp" lmtp

cmd="lmtpd" listen="localhost:lmtp"

}

EVENTS { checkpoint

cmd="ctl_cyrusdb -c" period=30 delprune

cmd="ctl_deliver -E 3" at=0400 tlsprune

cmd="tls_prune" at=0400

}

ACCESS CONTROL

When TCP Wrappers is used to control access to Cyrus services, the name of the service entry should be used as the process name in the hosts_access(5) table. For instance, in the example above, "imap", "imaps", "lmtpunix" and "lmtp" would be used as the process names. This allows a single daemon such as imapd to be run in different modes or configurations (i.e., SSL and non-SSL enabled) yet still have separate access control rules.

SEE ALSO

cyrmaster(8), imapd(8), pop3d(8), lmtpd(8), timsieved(8), idled(8), notifyd(8), ctl_cyrusdb(8), ctl_deliver(8), tls_prune(8), hosts_access(5)