2003-01-04 Martin Mares * Released as 2.1.11. * Makefile: Changed configuration of installation directories -- all paths are now set at the top of the Makefile instead of being scattered between the installation rules. The default installation now goes always to /usr/local regardless of the OS as most distributions already contain some version of pciutils and we don't want custom installations to interfere with the default ones. * Makefile: Removed a couple of ancient install hacks: we no longer try to avoid overwriting a newer pci.ids file (users are now expected to use update-ids) and we don't try to remove /etc/pci.ids (a long time has passed since the last version which used it). * Makefile: Paths to pci.ids in man pages automatically get the right path. * Added the update-ids utility. * lib: Removed partially implemented "syscall" access method which will probably never be needed. 2002-12-27 Martin Mares * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe. * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with discontiguous numbering of functions. This is already present in the Linux kernel for several years, but I forgot to update pciutils as well. 2002-12-26 Martin Mares * lib/header.h, lspci.c: Dump AGP3 flags and speeds. * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header, there is no reason to prefer the kernel version. * lib/proc.c (proc_scan): Don't forget to initialize hdrtype. * Added preliminary version of NetBSD support by Quentin Garnier . 2002-04-06 Martin Mares * lspci.c: Mention "-xxx" in the help. 2002-03-30 Martin Mares * Released as 2.1.10. * Removed pci.ids from the CVS as they are now maintained separately. They are still included in the tarball, but if you are building pciutils from CVS sources or you want to get a newer ID file than the one distributed, just use "make update-ids" to download the most recent snapshot from pciids.sf.net. * Makefile, README: Updated accordingly. * Makefile: Added a couple of maintenance targets. * maint/*: Maintainer's utilities now reside here (present only in CVS, not in the tarball). * lib/names.c (parse_name_list): End-of-line comments are no longer supported. Hashes are now perfectly valid in all names and they start a comment only at the start of the line. 2002-03-26 Martin Mares * README: Rewritten. * Makefile: When the currently installed pci.ids file is newer than the version to be installed, don't overwrite it. Suggested by Jean Delvare . 2002-03-24 Martin Mares * lspci.c (show_pcix_bridge): Added PCI-X capability display. Contributed by Jeff Garzik . * lib/header.h: Added PCI-X stuff. Again by Jeff. * Makefile (CFLAGS): -Werror is gone. * lspci.c (format_agp_rate): Fixed AGP rate reporting. * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and function 7. * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor or device hexadecimally, don't confuse it with chip vendor/device ID. First reported by Marc Boucher . 2001-11-04 Martin Mares * Released as 2.1.9. * pci.ids: Synced with the PCI ID Repository at SourceForge (http://pciids.sourceforge.net/). 2000-08-25 Martin Mares * pci.ids: Updated ID's, synced with kernel 2.4.0-test7. 2000-06-13 Martin Mares * Makefile (uninstall): Fixed. * pci.ids: ID updates. 2000-05-20 Martin Mares * Released as 2.1.8. * pci.ids: ID updates. * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds. 2000-05-04 Martin Mares * lspci.c (show_verbose): If the header type doesn't match device class, just print a warning and still use the header type, assuming bogus class info. 2000-05-01 Martin Mares * lspci.c (show_pm): Updated according to PCI PM specs 1.1. * pci.ids: Updated Contemporary Control ARCnet card entries. * pci.ids: Synchronized class list with latest PCI SIG documents. 2000-04-29 Martin Mares * lib/names.c (pci_lookup_name): Fixed the cheat. * lib/internal.h: Moved UNUSED/inline hacks above all other declarations. * pci.ids: Various ID updates. 2000-04-21 Martin Mares * Released as 2.1.7. * pciutils.spec: Added German description. * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's are the same as device ID and just output subsystem name according to device name. * lib/proc.c: Use UNUSED instead of __attribute__((unused)). * lib/pci.h: Added the correct typedefs for AIX. * lib/generic.c (pci_generic_scan_bus): Export. * lib/configure: Detect AIX. Use "echo '...\c'" instead of "echo -n" if the shell isn't bash. * lspci.c: Avoid using alloca() if not compiled by GCC. (insert_dev): Avoid returning a void value. * Makefile: Choose which install utility to use according to OS type. Also use `-o' instead of `-or' in find arguments. Part of the AIX port. * lib/aix-device.c: Added AIX low-level interface. Contributed by Dave Johnson , thanks a lot! * pci.ids: Few new ID's. * pciutils.h, lib/internal.h: Redefine __attribute__ and inline when not compiled by GCC. 2000-04-17 Martin Mares * Released as 2.1.6. * pci.ids: Added a large batch of ID's contributed by Gunther Mayer and synced the list with the 2.3.99pre6 kernel. Thu Mar 9 13:11:39 2000 Martin Mares * lib/example.c: Added a simple example of how to use the library. * lspci.man, setpci.man: Revealed --version. Well spotted by Adam Sulmicki. * pci.ids: Added lots of new ID's and synced with 2.3.50. Tue Feb 15 00:16:21 2000 Martin Mares * Released as 2.1.5. * pciutils.spec: Updated spec file from Andreas Jaeger. Now using %{_mandir} to find the right location to install manual pages to. * pci.ids: New ID's. * setpci.c (main): Don't crash when `-s' or `-d' is given with no argument. Mon Jan 24 20:04:11 2000 Andreas Jaeger * lib/i386-ports.c: Include only on systems without glibc. Mon Jan 24 11:24:43 2000 Martin Mares * Makefile: Modified to work with the Linux FHS brain-damaged idea of putting man pages to /usr/share/man. Now we choose either /usr/man or /usr/share/man depending on which one exists. Sun Jan 23 10:52:34 2000 Martin Mares * pci.ids: Synced with Linux 2.3.40. * Released as version 2.1.4. Thu Jan 20 11:08:32 2000 Martin Mares * lspci.c (scan_device): Fixed bug in reading of cardbus extensions. * lib/proc.c: pread/pwrite fixed again, this time on libc5 :( * lspci.c (format_agp_rate): Better formatting of AGP rates. * pci.ids: New ID's. * lib/configure: Added configuration for ia64 (the same as for Alpha). Patch from Stephane Eranian . Thu Jan 13 23:01:52 2000 Martin Mares * Released as version 2.1.3. * pci.ids: New ID's. * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli. * lib/access.c: Corrected order of access methods -- it's wonderful how long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff. Sat Dec 11 23:34:48 1999 Martin Mares * Released as version 2.1.2. * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's. Sat Dec 4 13:11:03 1999 Martin Mares * Released as version 2.1.1. * pci.ids: Several new ID's. * setpci.c (exec_op): Don't forget to increment address after writing single value, so that `30.b=12,34,56,78' works as expected. Reported by Petr Soucek . Wed Nov 3 10:24:38 1999 Martin Mares * lspci.c (show_terse): If prog-if is zero, but it's present in the ID list, show it. Sat Oct 30 11:06:35 1999 Martin Mares * Released as version 2.1. * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in lots of contributed entries. Thu Oct 14 10:40:12 1999 Dave Jones * pci.ids: Added lots of subsystem definitions. Sat Oct 9 14:32:28 1999 Martin Mares * setpci.man: Better example. * lspci.c: Resolve prog-if names. * lib/names.c: Adapted to new pci.ids syntax. * pci.ids: Reorganized the pci.ids file. Subsystems are listed under devices, classes can optionally contain prog-if information. New ID's, as usually. Wed Sep 22 09:45:24 1999 Martin Mares * pci.ids: New ID's. As usually. * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows unless we're vvvery verbose. Mon Sep 20 11:22:54 1999 Martin Mares * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line. Tue Sep 14 09:31:01 1999 Martin Mares * pci.ids: New ID's. Again. Thu Aug 5 17:45:42 1999 Martin Mares * lspci.c (show_size): Don't show size if it's zero (usually due to bus-centric mode being enabled). Tue Jul 20 13:25:09 1999 Martin Mares * lib/pci.h: Types are OS dependent. * lib/internal.h: Byte order hacks are OS dependent. * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS. * lib/Makefile, lib/access.c: Added fbsd-device target. * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID incorrectly set to device ID. * README: Added a note that we support FreeBSD. * Makefile (PREFIX, ROOT): Set it depending on the OS. (%.8): Grrr, BSD date is not able to convert date formats the same way as GNU date does. Use sed instead. (install): Use `-c' when calling install. * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed by Jari Kirma . * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread and pwrite only when we are certain it's safe (i.e., glibc 2.1 on all architectures or any libc on a i386 where we really know how to use syscalls directly). In all other cases, emulate it with lseek/read/write. * pci.ids: Some more IDs. Mon Jul 19 14:10:36 1999 Martin Mares * pci.ids: Added IDs of parallel port controller cards as sent by Tim Waugh . Wed Jul 7 00:55:48 1999 Martin Mares * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS. * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and HAVE_LONG_ADDRESS. * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS on Alpha. * lspci.c (show_msi): Added dumping of the MSI capability. (show_slotid): The same for SlotID capability. (show_caps): Seperated capability dumping, because it should be used for both htype0 and htype1. Even PCI 2.2 doesn't mention layout of htype2, so I'm a bit unsure about it wrt capabilities -- they at least have to live somewhere else since address 0x34 is already defined differently in htype2. * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2). (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto. (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2. * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers (required by the PCI 2.2 specs). Mon Jul 5 12:45:19 1999 Martin Mares * lspci.c (show_size): Added new function for dumping of region sizes. (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled ROMs et cetera. * lib/pci.h (struct pci_dev): known_fields moved to the public part of the structure. * Added support for region sizes. Needs support in the kernel, because sizes have to be scanned before drivers initialize yourself. pci_fill_info() now returns a bitmask of what fields were really read. Mon Jun 28 18:37:51 1999 Dave Jones * Makefile: Added `uninstall' target - removes all traces of pciutils. * pci.ids: - Lots of cleanups in the ATI, S3, Adaptec vendors. - Changed Compaq QVision 1280/p definitions, as it's not possible to determine the revision from the device ID. - Same for the Tseng ET4000. The id's said I had a rev C, when it was actually a rev B. - Removed some unnecessary strings `PCI'. Unless it's an AGP card, it should be obvious that it's PCI. `Ethernet card'. This should be determined from config space. - Lots of other new vendors & devices - Other additional small cleanups. Mon Jun 21 22:11:10 1999 Martin Mares * lib/names.c (pci_lookup_name): When device ID lookup fails, return hexadecimal device ID instead of vendor ID. Well spotted by Axel Bodemann , I've just extended the fix to subsystem ID's. Thu Jun 17 19:48:21 1999 Martin Mares * lspci.c (show_agp): Bug fix from Petr Vandrovec . The command register was displayed incorrectly. Wed Jun 2 22:42:44 1999 Martin Mares * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded numbers if not supplied by the libc. Wed May 19 13:24:39 1999 Martin Mares * Released the whole package as version 2.0. Fri May 14 22:42:02 1999 Martin Mares * pci.ids: Added several new ID's contributed by people on the linux-pci list. Mon Apr 19 15:21:08 1999 Jakub Jelinek * lspci.c: Display I/O addresses correctly on sparc64. * lib/header.h: Ditto. * lib/configure: On sparc set HAVE_64BIT* as well, we want a binary which works on both 32bit and 64bit SPARCs. Sun Apr 18 21:14:58 1999 Martin Mares * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob . * pci.ids: A lot of updates from Adam J. Richter . Sun Feb 28 22:26:21 1999 Martin Mares * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged as a multi-function device, because several single-function devices don't decode the function bits at all. Sun Feb 14 23:48:22 1999 Martin Mares * Makefile (install): Don't use "-o root -g root" for installation since it breaks on machines where programs are not installed by root. Reported by Richard Gooch Tue Feb 9 15:54:39 1999 Martin Mares * lspci.c (show_bases): Use new address masking macros and pciaddr_t. * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit or 64-bit depending on CPU. * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks according to bus address width. Thu Jan 28 20:54:16 1999 Martin Mares * Released as 1.99.4. * lspci.c: Capability list parser now recognizes both AGP registers and PCI Power Management registers (the latter is mainly guesswork based on DEC/Intel 21153 bridge specs since I don't have the PCI Power Management document). * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-' by FLAG macro. * lspci.c: Added bridge checks to bus mapping code. Wed Jan 27 14:59:16 1999 Martin Mares * lspci.c: Implemented bus mapping mode (-M). * lspci.c (scan_devices): Split to scan_devices() and scan_device(). (show): Split to show() and show_device(). * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO, set it to the real access method afterwards. Mon Jan 25 23:46:13 1999 Martin Mares * lib/generic.c (pci_generic_fill_info): If in buscentric mode, don't check PCI_COMMAND for I/O and memory enables. Mon Jan 25 21:28:49 1999 Martin Mares * Makefile: Added target `release' which substitutes new version number to .spec, .lsm and README. Also rewrote target `dist'. * Released as 1.99.3. Sun Jan 24 22:10:36 1999 Martin Mares * lib/header.h: Until kernel adopts new layout of PCI includes (i.e., separate declaration of header structure, functions and device IDs), which is not going to happen before 2.3, we'll use our own definiton of the header. * lspci.c (show_verbose): Display `Cap' flag in device status. * lspci.c (show_htype0): Display capability lists whereever available. The only capability name we recognize now is `AGP'. Unfortunately, capabilities are stored in device-dependent portion of the configuration space and are thus available only to root unless you read a dump. * lspci.c (scan_devices): Use cache instead of buffering. * lib/buffer.c: Removed (obsoleted by the cache). * lib/access.c: Added general caching mechanism. Sat Jan 23 21:30:54 1999 Martin Mares * pci.ids: Added few devices. Fri Jan 22 19:29:31 1999 Martin Mares * Version string is now defined in top-level Makefile, exported to the configure script and also substituted to man pages. * lspci.c (show_bases): Rewrote displaying of 64-bit addresses. (show_verbose): Rewrote interrupt display logic. * lib/i386-ports.c: Include sys/io.h only on glibc systems. * lib/configure: Rewrote detection of Linux versions. Now it works on 2.0 kernels (only with direct/dump access, of course). * lib/internal.h: New bytesex macros using whenever available. * lib/proc.c (proc_read, proc_write): Distinguish between short read/write and real errors. * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since libpci respects buscentric mode automatically. * lspci.c (show_hex_dump): For CardBus bridges, print out 128 bytes of header (the whole standard part). * common.c: pcilib options are now all uppercase. Also moved PCI access debugging option here. * Released as 1.99.2. Wed Jan 20 22:50:35 1999 Martin Mares * Wrote configure script and rewrote Makefiles. * Removed few unused variables. Wed Jan 20 12:21:56 1999 Martin Mares * common.c: Moved several functions used in both setpci and lspci here. This includes parsing of libpci-related options. * More library tweaks. * filter.c, names.c: Moved to library. * setpci: Rewritten to use the library. * Released as 1.99.1. Tue Jan 19 23:00:12 1999 Martin Mares * lspci.c (scan_devices): For cardbus bridges, read first 128 bytes of config space to get full standard header. * Makefile (CFLAGS): Removed "-Wno-unused". * Started the "New Generation" branch and introduced the PCI library. * lspci: Rewritten to use the library. Tue Jan 19 22:24:08 1999 Martin Mares * Released as version 1.10. Mon Jan 18 08:51:17 1999 Martin Mares * lspci.8, setpci.8: Miscellaneous fixes as suggested by Dag Wieers . Sun Nov 29 20:05:56 1998 Martin Mares * pciutils.spec (Name): Update from Krzysztof G. Baranowski. Sun Nov 22 10:49:56 1998 Martin Mares * Makefile, pciutils.h: Moved pci.ids to /usr/share. * Released as version 1.09. Wed Nov 18 15:47:05 1998 Martin Mares * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind bridge. Thanks to Petr Vandrovec for bug report. Fri Oct 23 18:59:19 1998 Martin Mares * setpci.c: Don't include with glibc >= 2.1. Mon Oct 19 21:53:30 1998 Martin Mares * Released as version 1.08. * setpci.c: glibc 2.1.x already defines pread() and pwrite(). * lspci.8: Changed warning about lspci -xxx. * lspci.c: Require "-xxx" for full configuration space dump, so that it's impossible to crash the machine by single typo. * specs: Added (courtesy of Krzysztof G. Baranowski ). Wed Sep 9 12:03:24 1998 Martin Mares * lspci.c (show_bases): Better displaying of unassigned and disabled bases. Thanks to Gabriel Paubert for an idea. Wed Sep 2 10:58:01 1998 Martin Mares * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC. (thanks to Geert Uytterhoeven for finding this out) Fri Jul 17 10:43:30 1998 Martin Mares * lspci.c (show_verbose): Print subsystem ID using the new resolver. (show_machine): Print subsystem ID. * names.c: New name resolution engine supporting subsystem IDs. * Released as version 1.07. Wed Jul 15 15:37:21 1998 Martin Mares * lspci.c (show_htype2 etc.): Displaying of CardBus headers. (show_bases): Honor the `cnt' argument. (grow_tree): Parse CardBus headers in tree mode as well. * pci.h: Updated CardBus header field description. I still don't have the CardBus standard available, but OZ6832 specs contain full description of all header fields supported by the chip. Tue Jun 9 22:53:59 1998 Martin Mares * Released as 1.06. * names.c (parse_name_list): Killed an unused variable. * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1 if they are not defined by glibc (needed for glibc built on older kernels). Ugly. * setpci.c (exec_op): Fixed error messages. Thanks, Steve! Mon Jun 8 10:59:22 1998 Martin Mares * Released as 1.05. * setpci.c: Problems with pread()/pwrite() with glibc on Alpha should be gone. Again thanks to Steve for bug report. * filter.c (filter_parse_slot): Fixed ":x" type filters. * pci.ids: Killed duplicate entry. Thanks to Stephen Williams for reporting this. Sun Jun 7 19:27:51 1998 Martin Mares * lspci.c (main), setpci.c (main): Implemented "--version". * Released as 1.04. * pciutils.h (PCIUTILS_VERSION): Added version string. * filter.c, names.c: Extraneous #include removed. Thanks to Geert Uytterhoeven for bug report. Thu May 28 14:45:58 1998 Martin Mares * pci.ids: More updates from Jens Maurer. Wed Apr 22 10:00:39 1998 Martin Mares * pci.ids: Updates from Jens Maurer. Sun Apr 19 11:14:25 1998 Martin Mares * Released as 1.03. * setpci.8: Written. * setpci.c: Finished. * lspci.c: Now able to fetch expansion ROM base from kernel device list and print it if not in buscentric mode. Tue Mar 31 23:11:57 1998 Martin Mares * setpci.c: Added. Sun Mar 22 15:39:08 1998 Martin Mares * lspci.8: Updated the documentation. * lspci.c: Modified to use the new filtering mechanism (options -f and -d). * filter.c: Introduced new generic device filter. Thu Mar 19 17:03:48 1998 Martin Mares * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying of PCI-to-PCI bridges in the tree format. Sun Feb 15 10:12:25 1998 Martin Mares * lspci.c (show_machine): Added non-verbose mode of machine-readable dump. * pci.ids: Updates from Jens Maurer. * Released as version 1.02. Thu Feb 12 16:53:28 1998 Martin Mares * lspci.c: Added a "-m" switch for dumping machine-readable configuration data (requested by Bjoern Kriews ). Mon Feb 9 13:17:43 1998 Martin Mares * Makefile, pciutils.h: Include local pci.h instead of if available. This should avoid all problems with official kernel not synchronized to newer PCI code in CVS -- standard distribution of pciutils now contains pci.h from current CVS kernel, pciutils in CVS contain no pci.h and use the correct kernel include. * Makefile: Fixed installation path for man pages. Sat Feb 7 15:15:46 1998 Martin Mares * README: Updated. * lspci.8: Created a man page. * Releasing as version 1.0. Tue Feb 3 20:56:00 1998 Martin Mares * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx to all the C sources. This should eliminate problems with 32-bit compilers on sparc64. * lspci.c (show_verbose): Recognize CardBus bridge header type. (show_htype2): Stub routine. (scan_config): Write sensible error message if the kernel denies reading of upper part of the PCI config space.