Kernel driver `i2c-sis630.o' Status: beta Supported adapters: * Silicon Integrated Systems Corp (SiS) 630 chipset (Datasheet: available at http://amalysh.bei.t-online.de/docs/SIS/) 730 chipset * Possible other SiS chipsets ? Author: Alexander Malysh License: GPL Module Parameters ----------------- force = [1|0] Forcibly enable the SIS630. DANGEROUS! This can be interesting for chipsets not named above to check if it works for you chipset, but DANGEROUS! high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,what your BIOS use). DANGEROUS! This should be a bit faster, but freeze some systems (i.e. my Laptop). Description ----------- This SMBus only driver is known to work on motherboards with the above named chipsets. If you see something like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 or like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 in your 'lspci' output , then this driver is for your chipset. Note: kernel versions later than 2.4.18 not tested. If anyone owns a board with those chips AND is willing to risk crashing & burning an otherwise well-behaved kernel in the name of progress... please contact me at or via the project's mailing list: see http://www.lm-sensors.org/wiki/AuthorsAndContributors. Please send bug reports and/or success stories as well. Thank Yous ----------- Philip Edelbrock - testing SiS730 support Mark M. Hoffman - bug fixes To anyone else which I forgot here ;), thanks!