Kernel driver `adm1025.o' ========================= Status: Complete, known to work but not heavily tested Supported chips: * Analog Devices ADM1025 Prefix: 'adm1025' Addresses scanned: I2C 0x2c - 0x2e Datasheet: Publicly available at the Analog Devices website * Philips NE1619 Prefix: 'ne1619' Addresses scanned: I2C 0x2c - 0x2d Datasheet: Publicly available at the Philips website The NE1619 presents some differences with the original ADM1025: * Only two possible addresses (0x2c - 0x2d). * No temperature offset register, but we don't use it anyway. * No INT mode for pin 16. We don't play with it anyway. Author: Chen-Yuan Wu and Jean Delvare License: GPL Module Parameters ----------------- * force: short array (min = 1, max = 48) List of adapter,address pairs to boldly assume to be present * force_adm1025: short array (min = 1, max = 48) List of adapter,address pairs which are unquestionably assumed to contain a `adm1025' chip * force_ne1619: short array (min = 1, max = 48) List of adapter,address pairs which are unquestionably assumed to contain a `ne1619' chip * probe: short array (min = 1, max = 48) List of adapter,address pairs to scan additionally * probe_range: short array (min = 1, max = 48) List of adapter,start-addr,end-addr triples to scan additionally * ignore: short array (min = 1, max = 48) List of adapter,address pairs not to scan * ignore_range: short array (min = 1, max = 48) List of adapter,start-addr,end-addr triples not to scan Description ----------- (This is from Analog Devices.) The ADM1025 is a complete system hardware monitor for microprocessor-based systems, providing measurement and limit comparison of various system parameters. Five voltage measurement inputs are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and the processor core voltage. The ADM1025 can monitor a sixth power-supply voltage by measuring its own VCC. One input (two pins) is dedicated to a remote temperature-sensing diode and an on-chip temperature sensor allows ambient temperature to be monitored. One specificity of this chip is that the pin 11 can be hardwired in two different manners. It can act as the +12V power-supply voltage analog input, or as the a fifth digital entry for the VID reading (bit 4). It's kind of strange since both are useful, and the reason for designing the chip that way is obscure at least to me. The bit 5 of the configuration register can be used to define how the chip is hardwired. Please note that it is not a choice you have to make as the user. The choice was already made by your motherboard's maker. If the configuration bit isn't set properly, you'll have a wrong +12V reading or a wrong VID reading. The way the driver handles that is to preserve this bit through the initialization process, assuming that the BIOS set it up properly beforehand. If it turns out not to be true in some cases, we'll provide a module parameter to force modes. Chip Features ------------- Chips 'adm1025' and 'ne1619' LABEL LABEL CLASS COMPUTE CLASS MODE MAGN in0 - - R- 2 in1 - - R- 2 in2 - - R- 2 in3 - - R- 2 in4 - - R- 2 in5 - - R- 2 in0_min in0 in0 RW 2 in1_min in1 in1 RW 2 in2_min in2 in2 RW 2 in3_min in3 in3 RW 2 in4_min in4 in4 RW 2 in5_min in5 in5 RW 2 in0_max in0 in0 RW 2 in1_max in1 in1 RW 2 in2_max in2 in2 RW 2 in3_max in3 in3 RW 2 in4_max in4 in4 RW 2 in5_max in5 in5 RW 2 temp1 - - R- 1 temp1_low temp1 temp1 RW 1 temp1_high temp1 temp1 RW 1 temp2 - - R- 1 temp2_low temp2 temp2 RW 1 temp2_high temp2 temp2 RW 1 vid - - R- 3 vrm - - RW 1 alarms - - R- 0 LABEL FEATURE SYMBOL SYSCTL FILE:N in0 SENSORS_ADM1025_IN0 in0:3 in1 SENSORS_ADM1025_IN1 in1:3 in2 SENSORS_ADM1025_IN2 in2:3 in3 SENSORS_ADM1025_IN3 in3:3 in4 SENSORS_ADM1025_IN4 in4:3 in5 SENSORS_ADM1025_IN5 in5:3 in0_min SENSORS_ADM1025_IN0_MIN in0:1 in1_min SENSORS_ADM1025_IN1_MIN in1:1 in2_min SENSORS_ADM1025_IN2_MIN in2:1 in3_min SENSORS_ADM1025_IN3_MIN in3:1 in4_min SENSORS_ADM1025_IN4_MIN in4:1 in5_min SENSORS_ADM1025_IN5_MIN in5:1 in0_max SENSORS_ADM1025_IN0_MAX in0:2 in1_max SENSORS_ADM1025_IN1_MAX in1:2 in2_max SENSORS_ADM1025_IN2_MAX in2:2 in3_max SENSORS_ADM1025_IN3_MAX in3:2 in4_max SENSORS_ADM1025_IN4_MAX in4:2 in5_max SENSORS_ADM1025_IN5_MAX in5:2 temp1 SENSORS_ADM1025_TEMP1 temp1:3 temp1_low SENSORS_ADM1025_TEMP1_LOW temp1:2 temp1_high SENSORS_ADM1025_TEMP1_HIGH temp1:1 temp2 SENSORS_ADM1025_TEMP2 temp2:3 temp2_low SENSORS_ADM1025_TEMP2_LOW temp2:2 temp2_high SENSORS_ADM1025_TEMP2_HIGH temp2:1 vid SENSORS_ADM1025_VID vid:1 vrm SENSORS_ADM1025_VRM vrm:1 alarms SENSORS_ADM1025_ALARMS alarms:1